User Instructions - Ambiano JB-218 Manual Del Usuario

User instructions

1. Place your ingredients into the stainless-steel cup. Please note that there are
indentations on the cup that show a minimum height and a maximum height
for your ingredients. Of the three indentations, the minimum height is the
lowest indentation and the maximum height is the highest. If the minimum
height is not reached the mixing shaft will not be able to work properly. If the
ingredients go past the maximum height indentation the ingredients may
overflow while mixing.
Note: When mixing your milkshake, add 2 to 3 cups of ice cream + ¾ to 2 cups
milk + desired ingredients. These are approximate measurements. Always add
the liquid ingredients first. You may look online or at your local library for
milkshake recipes.
2. Place the mixing cup under the top support clip and let it rest on the bottom
rest clip.
3. Make sure the power switch is OFF, plug the power cord into an electrical
outlet, and switch to LOW (1). After 10 seconds you can switch to HIGH (2) if
needed.
4. If you are using very hard ice cream or if the shake is very thick you may
carefully remove the cup from the support and rest clips, and with the mixing
shaft still submerged in the shake, move the cup around slightly for more
thorough mixing.
5. When finished, switch the power to OFF, remove the cup (using the tilt head
feature if needed) and pour your shake into a glass to serve.
Unplug the milkshake maker when not in use.
8
User instructions