Manitou 3-E2 Serie Manual De Reparación página 112

REASSEMBLY OF THE TILTING CYLINDER
- Reassemble by carrying out in reverse order the operations described in the chapter "REMOVAL
OF THE TILTING CYLINDER", also complying with the following instructions.
Fig. E
- Check that the tilting cylinder is in good working order.
- Clean the articulation axles (item. 5 Fig. E) before reassembling and apply a thin layer of
grease (See chapter: CHARACTERISTICS OF THE LIFT TRUCK in group 0 - GENERAL).
- Also clean and grease the articulations (Item. 7 Fig. E) with the same grease.
5
6
5
13
6