Assembly Instructions - Kobalt SGY-AIR227 Manual Del Usuario

ASSEMBLY INSTRUCTIONS

1. Remove plastic air inlet protective cap
from air inlet (E) (See Figure 1).
2. Tighten male plug (not included), turning
clockwise with a wrench (not included) for
air tight connection (See Figure 2).
DO NOT OVERTIGHTEN.
NOTE: Use threaded sealant tape
(not included) on the threading of the
male plug.
3. Place 2 – 3 drops of air tool oil
(not included) into the male air plug before
each use (See Figure 3).
1
2
3
10
E
E