EAS ELECTRIC ETW7020DW Manual De Usuario página 35

CAUTION
1.The machine must be perfectly leveled and stabilized when the four
supporting feet are close to the ground. Lower the feet as much as possible
the basis that the machine is leveled.
2.Improper leveling adjustment may cause loud noise, machine vibrating,
machine displacement and other abnormal phenomena.
3.Air-vent is designed on the bottom of the machine (prevent blockage). Install
the washing machine on solid, smooth and skid-proof ground. Do not place
washing machine on soft blanket or wooden floor, or various desktops
stands, in case of unnecessary injury
Connect the inlet hose
1.Connect the inlet hose to tap and
anticlockwise.
2.Connect the other end of the inlet hose to the inlet
valve at the backside of the washing machine and
fasten the hose tightly clockwise.
inlet at the back of the machine,it must be
connected to a cold water supply.If there are two
inlet valve,one is connected to a
to a hot water supply.
Follow the indication of the picture below to complete the connection.
.
fasten it
when there is a
cold water supply and the other is connected
35 35
on
the
and
V.2 V.