Operate Washing Machine - EAS ELECTRIC ETW7020DW Manual De Usuario

OPERATE WASHING MACHINE

Ensure your machine is installed properly before use.
Before washing clothes for the first time, you must run a complete cycle without
clothes. To do this:
1.Connect power source and water.
2.Put a little detergent(about 10g) into the drawer and close it.
3.Press the On/Off button.
4.Turn the knob to the "Cotton" .
5.Press the Start/Pause button.
This will remove any water from the manufacturer's test run remaining in the
machine.
Sort clothes
Please read this recommendation carefully to avoid the
troubles of washing machine and damages of clothes.
1.Do not put clothes over load the rated capacity.
2.Sort the laundry by colour and by care label. Most garments
have a textile care label in the collar or side seam.
3. Make sure all the pockets are empty, foreign objects (e.g.
nails, coins, paper clips, etc.) can cause damage
garments and components in the machine. 4.Close any zips,
fasten hooks etc. before washing.
5.For clothes to be washed, they should be sorted according
to color. Dark clothes should not be washed with light clothes
especially.
6.Badly soiled areas, stains etc. should be pre-treated with liquid detergent,stain
removers etc.
7.Turn over the clothes which pill easily and is with woolen surface before putting
them into the machine.
NOTE: Make sure that no clothes is caught between the door and the seal.
37 37
to
V.2 V.