Designation; Description And Dimensions; Description; Dimensions - deville C077AR Instrucciones Para La Instalación Y El Uso

You are advised to have a thorough and careful
reading of the instructions for use in order to get
the best use and satisfaction of your DEVILLE
appliance.
The fact of not respecting the fixing, the installing
and the use istructions involves the responsibility
of the person who doesn't respect them.
THIS STOVE MUST BE INSTALLED IN
ACCORDANCE TO THE CURRENT D.T.U.
SPECIFICATIONS.
The stove must be installed by a skilled
professional.
All the local and national regulations as well as the
European standards have to be respected when
the stove is used.
The appliance mustn't be modified.

1 - DESIGNATION

Your DEVILLE appliance complies with the essential
requirements of the 305/2011 (EU) Construction
Products directive according to appendix ZA of the
EN 13240 standard.
It is an intermittent heating appliance operating
exclusively using wood combustion on a grate, in a
semi-closed combustion chamber.
Note down the serial number written on the descriptive
plate stuck on the appliance and on the certificate of
guarantee, write it down in the following box :
Serial number
This number will be necessary to identify your
appliance when spare parts will be needed.
2 – CALORIFIC NOMINAL POWER
Nominal Draught
power
C077AR 9 kW 12 Pa
C077AS 9 kW 12 Pa
C077AM 9 kW 12 Pa
Rated calorific power obtained according to
standard NF EN 13240 during a test under normal
and intermittent operating conditions.
Rated calorific power:
Obtained under a draught of 12 Pa, with a load of
2,05 kg of hard wood (hornbeam, oak, and so on) in
the form of a wooden log of about 8-11 cm in
diameter, length 48-54 cm.
Smoke Smoke
output / temperatures
weight
6.36 g/s 298,4 °C
6.36 g/s 298,4 °C
6.36 g/s 298,4 °C
Reload every 45 mn on a 0.5 kg bed of embers with
the air ventilation pull handle opened to its maximum
and the nozzle flap to the closed position.
The announced power is the average power obtained
with each 45 minute-load.

3 - DESCRIPTION AND DIMENSIONS

3.1 - Description

C077AR : Fig. 1a
C077AS : Fig. 1b
C077AM : Fig. 1c
The main elements constituting the stove are indicated
below :
(1) Handle
(2) Loading door
(3) Top
(4) Tube
(5) Panel or decoration
(6) Air adjustment knob
(7) Protection shield
(8) Ø 100 nozzle for external combustion air intake
(9) Nozzle flap control
A secondary air intake is incorporated into the upper
part of the door window in order to keep it clean and to
ensure better combustion of the wood.
The air damper, situated at the bottom of the door
allows to choose a fire speed.
C077AR
Net weight
of the 87 kg
appliance

3.2 - Dimensions

C077AR : Fig. 2a
C077AS : Fig. 2b
C077AM : Fig. 2c
3.3 - Top connection for C077AM (Fig. 12)
If you are installing your C077AM appliance with the
connecting nozzle on the top, the following operation
must be carried out on the nozzle:
- Unscrew the screw holding the flap control 
- Rotate the flap control  one half circle
- Tighten the screw holding the flap control 
Before mounting the nozzle, check that the flap is open
when the nozzle flap control is parallel to the nozzle
axis.
4 – INSTALLATION REQUIREMENTS FOR
THE APPLIANCE
The installation cannot be modified by the user.
11
C077AS C077AM
92 kg 97 kg