Citizen CH-456 Manual De Instrucciones página 22

CALLING UP THE DATA STORED IN MEMORY
2
If you press the
displayed.
Each time you press the switch, the measurement data are displayed in order
from the most recent to the oldest.
* You can fast-forward the data numbers in display by pressing and holding the
Memory switch.
* Example of display when the
The data number is displayed
before the measurement results.
• The value stored in memory is numbered in the order of measurements. For
example, when 90 sets of data are stored in memory, the data number 1
represents the latest data.
Data number: 1, 2, 3, ... ... 89, 90
HOW TO DELETE THE DATA
1
While pressing the
STOP" switch for more than 3 seconds.
All data stored in Memory will be deleted.
Memory switch again, past measurement data are
Ç
The latest data
Memory switch, press and hold the "START/
Press and
hold for 3
seconds
Deleted
- Eng 22 -
Memory switch is pressed.
Ç
The earliest data
A message
saying all the
data have been
deleted from
the memory is
displayed.