Operating Instructions; Care And Maintenance; Troubleshooting - Harbor Breeze ECHOLAKE 00876 Manual Del Usuario

Ventilador de techo
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATING INSTRUCTIONS

1. PULL CHAIN:
The fan pull chain is for motor speed control:
High, Medium, Low and Off. Pull chain once for
each position.
The light pull chain controls the light fixture either
ON or OFF with each pull of the chain.
2. REVERSE SWITCH:
When the season changes, you may want to change
the direction your fan spins. To switch between
clockwise and counterclockwise rotations, flip the fan
reversal switch.
WARNING: Wait for fan to stop before reversing the
switch.
A. In cooler weather, clockwise rotation creates an
upward airflow, which moves hot air from the
ceiling into the room. Push the switch RIGHT.
B. In warmer weather, counterclockwise rotation
creates a downward airflow, which cools the air.
Push the switch LEFT.
Fan pull
Light pull
chain
chain
Lowes.com/harborbreeze
16

CARE AND MAINTENANCE

Important: Shut off main power supply before beginning any maintenance.
Do not use water or detergents when cleaning the fan or fan blades. A dry dust cloth or lightly
dampened cloth will be suitable for most cleaning.
Clean fan housing with only a soft brush or lint-free cloth to avoid scratching the finish. Clean
blades with a lint-free cloth. You may occasionally apply a light coat of furniture polish to blades
for added protection.
At least twice a year, tighten all screws and lower canopy to check mounting bracket screws and
downrod assembly.

TROUBLESHOOTING

PROBLEM
Fan does not move.
Reverse
switch
Noisy operation.
Excessive wobbling. 1. The blades are loose.
POSSIBLE CAUSE
CORRECTIVE ACTION
1. Chain switch is "off".
1. Pull chain switch.
2. Faulty wire connection.
2. Turn power off. Loosen canopy,
3. Reverse switch not engaged.
3. Push switch firmly either way.
1. Blades are loose.
1. Tighten all blade screws.
2. Cracked blade.
2. Replace blades (call customer
3. Unapproved speed control.
3. Replace with an approved speed
1. Tighten all blade screws.
2. Blade brackets incorrectly
2. Reinstall blade brackets.
attached.
3. Switch with blade from the
3. Unbalanced blades.
4. The fan is not securely mounted.
4. Turn power off. Carefully loosen
5. Fan too close to vaulted ceiling.
5. Lower fan or move it to another
17
check all connections.
service).
control device.
opposite side.
the canopy and remount securely.
location.
Lowes.com/harborbreeze

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Echolake 00877

Tabla de contenido