Operating Instructions - Harbor Breeze LARALYN LRN32 Manual Del Usuario

FINAL INSTALLATION
15. Insert the plastic plug (DD) into the center
hole in the switch housing (I).
Hardware Used
DD
Plastic Plug
16. Attach switch housing (I) to switch housing
cover on motor housing assembly (H). Align
switch housing (I) holes with switch housing
cover holes. Install the previously removed
screws (Step 6, page 13) and tighten
securely.
17. Add fan pull chain extension (BB) to
corresponding chain.
Hardware Used
Fan pull chain extension
BB
15
x 8
16
Switch
housing
cover
17
x 1
BB
16

OPERATING INSTRUCTIONS

PULL CHAIN:
1. The fan pull chain is for motor speed control: High, Medium, Low and Off. Pull the chain
once for each position.
2. The light pull chain controls the light fixture either ON or OFF with each pull of the chain.
I
REVERSE SWITCH:
When the season changes ,you may want to change the direction the fan blades spin. To
switch between clockwise and counterclockwise rotation, flip the fan reversal switch.
NOTE: Wait for fan to stop before reversing switch.
DD
A. In warmer weather, counterclockwise
rotation creates downward airflow,
which cools the air. Push the switch
LEFT and see a Sun icon
B. In cooler weather, clockwise rotation
creates an upward airflow, which
moves hot air from the ceiling into the
H
room. Push the switch RIGHT and
see a Snowflake icon.
I
Sun icon Snowflake icon
17