HP DesignJet Z6610 60" Manual Del Usuario página 7

Fire hazard
To avoid the risk of fire, take the following precautions:
The customer is responsible for meeting the printer's requirements and the Electrical Code requirements
●
according to the local jurisdiction of the country where the printer is installed. Use the power supply voltage
specified on the nameplate.
Use only the power cord supplied by HP with the printer. Do not use a damaged power cord. Do not use the
●
power cord with other products.
Do not insert objects through slots in the printer.
●
Take care not to spill liquid on the printer. After cleaning, make sure all components are dry before using the
●
printer again.
Do not use aerosol products that contain flammable gases inside or around the printer. Do not operate the
●
printer in an explosive atmosphere.
Do not block or cover the openings of the printer.
●
Mechanical hazard
The printer has moving parts that could cause injury. To avoid personal injury, take the following precautions when
working close to the printer.
Keep your clothing and all parts of your body away from moving parts.
●
Avoid wearing necklaces, bracelets, and other hanging objects.
●
If your hair is long, try to secure it so that it will not fall into the printer.
●
Take care that sleeves or gloves do not get caught in moving parts.
●
Do not operate the printer with covers bypassed.
●
Internal fan blades are hazardous moving parts. Disconnect the printer before servicing.
●
Never insert your hands into the printer while it is printing, due to the moving parts inside.
●
Heavy paper hazard
Special care must be taken to avoid personal injury when handling heavy papers.
Handling heavy paper rolls may require more than one person. Care must be taken to avoid back strain
●
and/or injury.
When handling heavy paper rolls, wear personal protective equipment, including boots and gloves.
●
Follow your local Environmental Health and Safety regulations for handling heavy paper rolls.
●
Ink handling
HP recommends that you wear gloves when handling ink supplies.
ENWW
Safety precautions
3