Additional Information - HP DesignJet Z6610 60" Manual Del Usuario

EMC:
RoHS:
Other:
The product herewith complies with the requirements of the Low Voltage Directive 2006/95/EC (until 19.4.2016),
the Low Voltage Directive 2014/35/EU (from 20.4.2016), the EMC Directive 2004/108/EC (until 19.4.2016), the EMC
Directive 2014/30/EU (from 20.4.2016), the RoHS Directive 2011/65/EU and carries the
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.

Additional information

1. The product is assigned a Regulatory Model Number which stays with the regulatory aspects of the design.
The Regulatory Model Number is the main product identifier in the regulatory documentation and test
reports; this number should not be confused with the marketing name or the product numbers.
2. This product was tested in a typical HP environment.
Jordi Gorchs, Manager
Large Format Printing Division
Sant Cugat del Vallès, Barcelona
March 1, 2018
Local contact for regulatory topics only:
HP Deutschland GmbH, HP HQ-TRE, 71025 Boeblingen, Germany
HP Inc., 1501 Page Mill Road, Palo Alto 94304, U.S.A. 650-857-1501
ENWW
EN 55032:2012 Class A
CISPR 32:2012 Class A
EN 55022:2010 Class A
CISPR 22:2008 Class A
EN 55024:2010
CISPR 24:2010
EN 61000-3-2:2014
IEC 61000-3-2:2014
EN 61000-3-3:2013
IEC 61000-3-3:2013
FCC CFR 47 Part 15 Class A
ICES-003, Issue 5 Class A
EN 50581:2012
ENERGY STAR Qualified Imaging Equipment Operational Mode (OM) Test Procedure
®
marking accordingly.
Declaration of conformity
9