Ec Declaration Of Conformity - Worx WG500E Traducción De Las Instrucciones Originales

plUG REplAcEMEnT
(UK & iRElAnd Only)
If you need to replace the fitted plug then
follow the instructions below.
IMPORTANT
The wires in the mains lead are colored in
accordance with the following code:
Blue – Neutral
Brown – Live
As the colors of the wires in the mains lead of
this appliance may not correspond with the
coloured markings identifying the terminals
in your plug, proceed as follows. The wire
which is coloured blue must be connected to
the terminal which is marked with N. The wire
which is coloured brown must be connected to
the terminal which is marked with L.
wARNING: Never connect live or neutral
wires to the earth terminal of the plug. Only
fit an approved BS1363/A plug and the correct
rated fuse.
NOTE: If a moulded plug is fitted and has to
be removed take great care in disposing of the
plug and severed cable, it must be destroyed
to prevent engaging into a socket.
12 12
Connect
Blue to N
(neutral)
Outer sleeve
firmly clamped
All-in-one blower/vac/mulcher
13 Amp fuse approved
to BS1362
Brown L (live)
Cable grip
Ec dEclARATiOn OF
cOnFORMiTy
we,
POSITEC Germany GmbH
Theodor-Heuss-Ring 1-3
50668 Köln
Declare that the product,
Description
wORX All-in-one blower/vac/mulcher
Type wG500E wG501E
Function Picking up or blow debris
Complies with the following Directives,
EC Machinery Directive
EC Low Voltage Directive
EC Electromagnetic Compatibility Directive
2004/108/EC
Noise Emission in the Environment by
Equipment for Use Outdoors Directive
2000/14/EC amended by 2005/88/EC.
–Conformity assessment procedure as per
–Measured Sound Power Level
–Declared Guaranteed Sound Power Level
Standards conform to,
EN 60335-1
prEN 15503
EN 55014-1
EN 61000-3-2
EN 62233
The person authorized to compile the technical
file,
Name Russell Nicholson
Address Positec Power Tools (Europe)
Ltd, PO Box 152, Leeds, LS10 9DS, UK
2010/08/05
Jacky Zhou
POSITEC Quality Manager
2006/42/EC
2006/95/EC
Annex V
103.8dB(A)
105dB(A)
IEC 60335-2-100
EN ISO 3744
EN 55014-2
EN 61000-3-3
En