Environmental Protection; Important; Declaration Of Conformity - Worx WG505E Traducción De Las Instrucciones Originales

ENVIRONMENTAL
PROTECTION
Waste electrical products must not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
local authorities or retailer for recycling advice.
PLUG REPLACEMENT
(UK & IRELAND ONLY)
If you need to replace the fitted plug then follow the
instructions below.

IMPORTANT

The wires in the mains lead are colored in
accordance with the following code:
Blue = Neutral
Brown = Live
As the colors of the wires in the mains lead of this
appliance may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows. The wire which is coloured blue
must be connected to the terminal which is marked
with N. The wire which is coloured brown must be
connected to the terminal which is marked with L.
WARNING! Never connect live or neutral wires
to the earth terminal of the plug. Only fit an
approved BS1363/A plug and the correct rated fuse.
NOTE: If a moulded plug is fitted and has to be
removed take great care in disposing of the plug
and severed cable, it must be destroyed to prevent
engaging into a socket.
All-in-One Blower/Vac/Mulcher
DECLARATION OF
CONFORMITY
We,
POSITEC Germany GmbH
Konrad-Adenauer-Ufer 37
50668 Köln
Declare that the product,
Description Electric Blower Vacuum
Type WG505E(5-designation of machinery,
representative of Electric Blower Vacuum)
Function blowing and picking up debris into a
debris collector
Complies with the following Directives,
2006/42/EC, 2014/30/EU, 2011/65/EU,
2000/14/EC amended by 2005/88/EC
2000/14/EC amended by 2005/88/EC:
- Conformity Assessment Procedure as per
Annex V
- Measured Sound Power Level 106.7dB(A)
- Declared Guaranteed Sound Power Level
110dB(A)
Standards conform to
EN 60335-1
EN ISO 3744
EN 55014-1
EN 61000-3-2
The person authorized to compile the technical file,
Name Russell Nicholson
Address Positec Power Tools (Europe) Ltd,
PO Box 6242 Newbury RG14 9LT UK
Suzhou 2016/10/26
Allen Ding
Deputy Chief Engineer, Testing & Certification
EN 50636-2-100
EN 62233
EN 55014-2
EN 61000-3-3
EN
13