Parts Description; Before The First Use - Tristar RK6137 Manual De Usuario

Instruction manual
• The heating element surface is subject to
residual heat after use.
• The connector must be removed before the
appliance will be cleaned, please make sure
the inlet is completely dry before the unit will
be used again.
• Only use the appliance with the appropriate
connector.
• Surface are liable to get hot during
use.
• Always turn off the unit before cleaning or
maintenance.
• The appliance is not intended to be operated
by means of an external timer or a separate
remote-control system.

PARTS DESCRIPTION

1. Lid
2. Inner bowl
3. Steamer basket
4. Handle
5. Control panel
6. Base
4
7. Measuring cup
8. Spatula
9. Soup Ladle

BEFORE THE FIRST USE

• Take the appliance and accessories out the box. Remove the
stickers, protective foil or plastic from the device.
• Place the device on a flat stable surface and ensure a minimum
of 10 cm. free space around the device. This device is not
suitable for installation in a cabinet or for outside use.
• Put the power cable into the socket. (Note: Make sure the
voltage which is indicated on the device matches the local voltage
before connecting the device. Voltage 220V-240V 50/60Hz)
• Always place the inner pot inside the outer pot before switching
on the device.
• Make sure that the inner pot contains liquid, or be ready to
immediately add oil, butter or margarine to the inner pot before
switching on the device.
• Always dry the outer surface of the inner pot before placing it
inside the cooker. Any moisture remaining on the inner pot
surface may cause a cracking noise while the unit is heating up.
• When the device is turned on for the first time, a slight odour will
occur. This is normal, ensure adequate ventilation. This fragrance
is only temporary and will disappear soon.
• Do not place the cooking pot on other stoves for heating to avoid
deformation due to high temperature; do not replace the cooking
pot with other containers or place other containers on the heating
plate.