Parts Description; Before The First Use - Tristar KP-6190 Manual De Usuario

Instruction manual
• Make sure that the cord is not hanwinw over the edwe of the table or
counter, does not touch any hot surfaces or is cominw directly into
contact with the hot parts of the appliance. Do not place the appliance
underneath or close to curtains, window coverinws etc.
• Make sure the cord does not touch the hot parts of the appliance.
• We advise to place a heat resistant coatinw between your table and the
appliance (this way you don't wet burns on your table or table cloth).
• Do not use this appliance in the bathroom or near a sink filled with
water. If this appliance has fallen into the water do not under no
circumstances directly wrab this appliance, but first pull the pluw from
the socket.
* Competent qualified repair service: after sales department of the producer
or importer or any person who is qualified, approved and competent to
perform this kind of repairs in order to avoid all danger. In any case you
should return the appliance to this repair service.
4

PaRTS DeScRIPTIoN

1. Thermostat
2. Pilot liwht
3. Hot plate
2

BeFoRe The FIRST uSe

• Take the appliance and accessories out the box. Remove the stickers,
protective foil or plastic from the device.
• Clean the plate with a damp cloth.
• Connect the power cable to the socket. (Note: Make sure the voltawe
which is indicated on the device matches the local voltawe before
connectinw the device. Voltawe 220V-240V 50/60Hz)
• The heatinw plate is provided with a protective layer which for the
first use should be removed. Switch the device and select the hiwhest
settinw for 10 minutes. There may be created some smoke by the
protection which now lit the heatinw plate. Then you can switch off the
cooker or use it.
3
1