INDUCTION COOKER
TPI060210MD
If the display flashes alternately with the heat setting
• you have not placed a pan on the correct cooking zone or,
• the pan you're using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone. The display will automatically turn
off after 1 minute if no suitable pan is placed on it.
When you have finished cooking
1a. Turn the cooking zone off by scrolling down to"0" or touching "-" and "+" control together. Make sure the
display shows"0"
1b. Turn the whole cooktop off by touching the ON/OFF control.
2. Beware of hot surfaces
H will show which cooking zone is hot to touch. It will disappear when the surface has
cooled down to a safe temperature. It can also be used as an energy saving function if
you want to heat further pans, use the hotplate that is still hot.
32