Publicidad
Idiomas disponibles
Idiomas disponibles
Technical Specification
Model
Cooking Zones
Supply Voltage
Installed Electric Power
Product Size L×W×H(mm)
Building-in Dimensions A×B (mm)
Installation
Selection of installation equipment
Cut out the work surface according to the sizes shown in the drawing. For the purpose of installation and use,
a minimum of 5 cm space shall be preserved around the hole.
Be sure the thickness of the work surface is at least 30mm. Please select heat-resistant work surface material to
avoid larger deformation caused by the heat radiation from the hotplate. As shown below:
L (mm)
W (mm)
700
520
Under any circumstances, make sure the Induction cooker hob is well ventilated and the air inlet and outlet
are not blocked. Ensure the induction cooker hob is in good work state. As shown below
Note: The safety distance between the hotplate and the cupboard above the hotplate should be at least 760
mm.
TPI060210MD
4 Zonas
220-240V~ 50/60Hz
7000 W
700X520X50
560X490
H (mm)
D (mm)
60
56
43
INDUCTION COOKER
A (mm)
B (mm)
560
490
TPI060210MD
X (mm)
50 mini
Publicidad
