Telstar TPI060210MD Manual De Instrucciones página 41

Hints and Tips
Problem
The cooktop cannot
Be turned on.
The touch controls are
unresponsive.
The touch controls are
difficult to operate.
The glass is being
scratched.
Some pans make
crackling or clicking
noises.
The induction hob
makes a low humming
noise when used on
a high heat setting.
Fan noise coming from
the induction hob.
Possible causes
No power.
The controls are locked.
There may be a slight film of water
over the controls or you may be
using the tip of your finger when
touching the controls.
Rough-edged cookware.
Unsuitable, abrasive scourer or
cleaning products being used.
This may be caused by the
construction of your cookware
(layers of different metals
vibrating differently).
This is caused by the technology
of induction cooking.
A cooling fan built into your
induction hob has come on to
prevent the electronics from
overheating. It may continue to
run even after you've turned the
induction hob off.
Make sure the ceramic hob is connected
to the power supply and that it is switched
on.
Check whether there is a power outage
in your home or area. If you've checked
everything and the problem persists, call
a qualified technician.
Unlock the controls. See section
'Using your ceramic cooktop' for instruc-
tions.
Make sure the touch control area is dry
and use the ball of your finger when
touching the controls.
Use cookware with flat and smooth
bases. See 'Choosing the right
cookware'.
See 'Care and cleaning'.
This is normal for cookware and
does not indicate a fault.
This is normal and needs no action.
Do not switch the power to the
induction hob off at the wall while the
fan is running.
Use cookware suitable for induction
cooking. See section 'Choosing the
right cookware'.
Centre the pan and make sure that its
base matches the size of the cooking
zone.
41
INDUCTION COOKER
TPI060210MD
What to do