Sauder Palladia Serie Manual De Montaje página 15

11 11
1
Lift here.
BLACK 1-7/8" FLAT HEAD SCREW
(10 used for the SLATS)
4 1 1
8 4 0
F u l
l / Q
u e e
Back surface
With someone's help, move the Bed close to its final location in your room.
If you purchased the 411840 Full/Queen Headboard, assemble it and fasten it to the HEAD END (A). Use four SILVER 1-1/4"
BOLTS provided with the Headboard.
With someone's help, move the 413998 Bed and 411840 Headboard against the wall into its final location.
Following the instructions at the top of this page, carefully turn over the TOP/SLAT assembly and lower it onto the Bed with the
SHORT TOP (L) at the foot end.
Fasten the SLATS (G) to the LARGE CENTER UPRIGHTS (E). Use ten BLACK 1-7/8" LARGE HEAD SCREWS (CC).
413998
2
CC
n H
e a d
b o a
r d
www.sauder.com/services
Caution
Two person
lift required
Carefully lift and
3
lower onto the bed.
G
G
G
E
A
SILVER 1-1/4" BOLT
(4 used for the Headboard)
L
G
G
E
Foot
end
Page 15