Sauder Palladia Serie Manual De Montaje página 7

3 3
Open end
Open end
Fasten four EXTENSION RAILS (V) to the UPRIGHTS (F and H). Use eight GOLD 5/16" FLAT HEAD SCREWS (II).
NOTE: For each EXTENSION RAIL, turn a SCREW into the hole shown in the enlarged diagram. Then, slide the inner
cartridge of the EXTENSION RAIL in to find the other hole that lines up with the hole in the UPRIGHTS. Turn a SCREW into this
hole.
413998
V
F
H
V
www.sauder.com/services
V
F
H
GOLD 5/16" FLAT HEAD SCREW
Open end
Open end
V
(8 used in this step)
II
Page 7