ABB 6931U-101-500 Manual De Instrucciones página 31

Installation
Switch off supply voltage!
Supply and Load Connection (Fig. 1, pos. 5)
Connection to the supply system is via the terminals
L (phase) and N (neutral conductor). The load is connected
to the terminals ↓ ↓ ↓ ↓ ↓ (switched output terminal) and N.
Refer to the Connection Diagram illustrated in Fig. 2.
The device is installed in a standard flush-type box; it may
only be operated when the appropriate cover is in place.
a. Installation using screws
• Fix the device (Fig. 1, pos. 2), together with the mounting
plate (Fig. 1, pos. 1), in the conventional manner with the
screws supplied with the flush-type box.
GB