OSC
Key Functions of the Remote Control
MODE
• Press once: The control lamp for
• Press twice: The SLEEP (night mode)
• Press three times: The indicator
SPEED
• Press three times: The indicator
• The remote control can be used to
• Step 8: 1000 rpm
• Stage 7: 900 rpm
• Stage 6: 800 rpm
• Stage 5: 700 rpm
• Stage 4: 600 rpm
• Stage 3: 500 rpm
• Stage 2: 400 rpm
• Stage 1: 300 rpm
POWER
• When you press the ON button, the
• When you press the OFF button,
• Press once: The device swings to the right and
left and the L/R control lamp lights up blue.
• Press twice: The unit swings up and down and
the U/D indicator lights up blue.
• Press three times: The unit swings to the right and
left and then up and down. The indicator lights
light up blue.
• Press four times: Swing stop: All indicator lights
go out and the unit stops swinging.
NATURAL (natural) lights up red.
indicator will light blue.
lights are off and the unit is in
normal mode.
lights are off and the unit is in
normal mode.
set 8 speed levels.
control lamp lights up.
the indicator light is off.
EN
13