Battery Removal - Remington MB4125 Manual De Instrucciones

ENGLISH

BATTERY REMOVAL

• The appliance must be disconnected from the supply mains when removing
the battery.
• Turn the trimmer on and discharge all remaining power.
• Remove the comb attachment.
• Detach the blade cartridge.
• Remove the blade clip using a screwdriver.
• Pry the decorative panel off the top housing to expose the 2 screws located
toward the lower end.
• Unscrew the 2 screws.
• Pry the two halves of the housing apart from one another to expose the
internals.
• Unscrew the 4 screws on the circuit board.
• Disconnect the battery from the circuit board.
• The battery is to be disposed of safely.
H ENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to hazardous
substances in electrical and electronic goods, appliances marked with
this symbol must not be disposed of with unsorted municipal waste, but
recovered, reused or recycled.
7