Accessory Parts And Parts To Be Procured Locally - Toshiba MMU-AP0071YH Manual De Instalación

Accessory parts and Parts to be procured locally

H Accessory parts
Part name
Installation Manual
Heat Insulating pipe
Installation pattern
Pattern fixing screw
Refrigerant piping
• Piping material used for the conventional
refrigerant cannot be used.
• Use copper pipe with 0.8 mm or more thickness
for Ø6.4, Ø9.5, Ø12.7.
• Flare nut and flare works are also different from
those of the conventional refrigerant. Take out
the flare nut attached to the indoor unit of the air
conditioner, and use it.
H Parts to be procured locally
Connecting pipe (Liquid side)
(6.4mm (diam.), Nominal (diam.) 1/4" thick 0.8mm)
Connecting pipe (Gas side)
(12.7mm (diam.), Nominal (diam.) 3/8" thick 0.8mm)
Power supply cord
2
Cable 3-core 2.5mm , in conformity with Design 60245 IEC57
Q'ty Shape
1 This manual
2
1 —
5
(Be sure to hand over customers)
For heat insulating of pipe connecting section
For confirmation of ceiling opening and main unit position
Installation pattern fixing
<Separate sold parts>
Part name Q'ty
Standard wired
1
remote controller
Ceiling panel 1
1
Usage
Shape Usage
Model
RBC-AMT21E
Model
RBC-UY135PG