Rubbermaid 5L10 Instrucciones De Uso Y De Instalacion página 10

b.
Slightly raise front edge of roof enough to allow positioning of Roof Brace (RB) onto the side walls as shown.
Lower the roof onto the walls and align Roof Brace (RB) into pocket in Front Roof (J).
c.
Ensure Front Roof (J) is positioned against the back wall tongues.
From outside the shed, install one Screw (AA) at each corner.
Hold the edge of the roof down firmly at the corners while installing each screw.
Install remaining screws into remaining locations of back walls.
1.
3.
10
RB
Helpful Hint: Installation is easier using a magnetic bit or starting
2.
screws with a manual screwdriver to get seated. Pilot holes also
may be drilled using 1/8" bit.
J
AA (8)
J