Site Preparation - Rubbermaid 5L10 Instrucciones De Uso Y De Instalacion

CAUTIONS
CAUTION: Always use gloves when using a utility knife.
CAUTION: Always use eye protection/safety glasses
during assembly.
CAUTION: When installing screws, do not overtighten.
CAUTION: Drill only through initial panel wall, unless
otherwise indicated.

1.0 Site Preparation

Build a solid, level surface for the shed foundation. Consult your
local building authority for ordinances, restrictions, or permits
required before building any structure at your home.
Note: Minimum dimensions for foundations shown.
~4-1/2
27½"
55¼"
CARE & USE
• Shed can be cleaned with water and mild detergent as
necessary. DO NOT USE ABRASIVE DETERGENTS,
MATERIALS OR CLEANING TOOLS.
• To maximize your shed's performance, remove
excessive snow and/or leaf accumulation from the roof.
• In the event of severe weather, please disassemble
and store in a secure location.
FLOOR PLAN:
Size the construction site to fit the entire floor.
OPTIONAL STEP:
If desired, recessed anchor locations (5 places)
can be used to anchor the shed floor to a foundation
after you have constructed one.
24 "
3-5/8 "
"
18 "
~5 "
24-7/8 "
24 "
~55-1/4 "
120.0
Maximum opening
ANCHOR
LOCATIONS
3-5/8 "
~27-1/2 "
3