Festo HGP A Serie Instrucciones De Utilizacion página 22

HGP−...−A−B(−G..)
The grippers can be fitted in one of the following ways:
Base surface fitting (Insert
Side fitting with threaded holes
Side fitting with through holes (screws one size smaller)
Mounting steps
Insert centring sleeves ZBH−... (d) into the
recesses in the threaded holes
Place the gripper with centring sleeves
ZBH−... (d) onto the connection surface
Insert two screws (c) for fastening
Fig. 13
The characteristic values are grouped together in the following tables.
Tolerance
field
Recess∅ [mm] H8
Recess depth 0... + 0.1 mm
Width
(as through hole)
Max. permitted
tightening torque
Fig. 14
22
proximity switches
.
HGP−10−.. HGP−16−.. HGP−20−..
5 7
1.2 mm 1.6 mm
M3 M4
(M2) (M3)
1.2 Nm 3 Nm
(0.5 Nm) (1.2 Nm)
into groove beforehand)
.
c)
Screw c) one size smaller
Fig. 12
HGP−25−.. HGP−35−..
7 9
1.6 mm 2.1 mm
M4 M6
(M3) (M4)
3 Nm 10 Nm
(1.2 Nm) (3 Nm)
Festo HGP−...−A−B(−G..) 0405b English
.
d)
d)
12
2.6 mm
M8
(M6)
25 Nm
(10 Nm)