Purpose Of The Manual/Field Of Application - Interested Parties - Arneg Osaka 2 90 H216 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

DO NOT use the unit barefoot
DO NOT touch the unit with wet or damp hands or feet
DO NOT remove protective covers or panels that require the use of tools to be
removed. More specifically, do not remove the electrical panel cover. These
operations must always be carried out by specialised technicians.
DO NOT obstruct the air intake openings.
DO NOT walk on the top of the unit.
DO NOT use your feet to climb onto the front of the unit, for any reason. If
necessary, use an appropriate and suitable ladder in order to reach the
loading points. Danger: falls and serious injury.
DO NOT use spotlights with incandescent bulbs aimed directly at the unit.
Danger: overheating the merchandise.
Exposed merchandise should not be in direct sunlight. Danger: alteration of
merchandise.
Limit the temperature of radiating surfaces located in the sales point, e.g.
insulating ceilings.
IN THE CASE OF A GAS LEAK OR FIRE:
Do not stay in the room where the cabinet is located if it is not appropri-
ately ventilated. Disconnect the unit by means of the general switch
upstream of the appliance.
DO NOT USE WATER TO PUT OUT THE FLAMES, USE ONLY DRY
EXTINGUISHERS.
ANY OTHER USE NOT EXPLICITLY INDICATED IN THIS MANUAL IS TO BE
CONSIDERED DANGEROUS. THE MANUFACTURER SHALL NOT BE HELD
RESPONSIBLE FOR ANY DAMAGES THAT MAY OCCUR FROM IMPROPER,
ERRONEOUS, OR UNREASONABLE USE.
USEFUL TELEPHONE NUMBERS:
SWITCHBOARD +39 0499699333 - FAX +39 9699444 - CALL CENTRE 848 800225

3. Purpose of the Manual/Field of Application - Interested Parties

This instruction manual contains a description of the Osaka 2 line of refrigeration units,
manufactured by ARNEG Spa.
The following information provides instructions with regard to:
using the cabinet
technical specifications
installation and assembly
operator information
maintenance operations
safety information
The manual should be considered part of the unit and must be kept for its entire
working life.
The manufacturer is relieved from all liability in the following situations:
improper use
incorrect installation - not completed in accordance with the regulations specified
power supply faults
serious lack of maintenance
unauthorised alterations and operations
use of non-original spare parts
partial or complete lack of compliance with the instructions.
This manual must be the responsibility of an assigned person, stored in an appropriate
location, known to all assigned workers and maintenance employees, so that it can be
consulted whenever needed.
In the event of transfer to third parties, it must be delivered to the new user or owner,
duly informing the suppliers in a timely manner. If lost or damaged, please contact the
supplier.
This manual is intended for:
05060127 00 14/02/2012
Osaka 2
English
27

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido