Página 1
DMF 115 INSTRUCTION MANUAL We’ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-888-333-9952. We’re ready to help! Scan for easy install video san.us/18...
Página 2
60 lbs. weigh more than Yes — This mount is NOT compatible. (27.2 kg) 60 lbs. (27.2 kg)? Visit decora.sanus.com or call 1-888-333-9952 to fi nd a compatible mount. What is your Drywall with Solid concrete or Unsure? wall made of?
Página 3
Dimensions NOTE: TV shifts 2.99 in. (7.59 cm) to [cm] the right or left when in the home position. Consider this when selecting the location of your wall mount. [7.6] 15.8 OFFSET [40.0] 11.8 [30.0] 15° [20.0] 15° 15.8 [40.0] [10.0] 11.8 [30.0]...
Página 4
Supplied Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer;...
Página 5
STEP 3 Parts and Hardware STEP 2 Parts and Hardware Locking Screw Wall Plate Template Wall Plate Assembly 1/4-20 x 3/4 in. Additional Parts and Hardware Cable Ties Concrete Installation Kit CMK1 (not included) Contact Customer Service at 1-888-333-9952 to have these additional pieces shipped directly to you.
Página 6
STEP 1 Attach TV Bracket to TV 1.1 Measure Your TV Hole Pattern 1.2 Assemble Your TV Bracket Based on your TV hole pattern measurements Measure the width and height of your ), determine your TV bracket TV hole pattern in cm. [cm] configuration: A, B, C, D or E.
Página 7
[cm] [cm] [cm] 40.0 x 30.0 cm 40.0 x 20.0 cm 20.0 x 40.0 cm 15.75 [40.0] 7.87 [20.0] 15.75 [40.0] 11.81 7.87 [30.0] [20.0] 15.75 [40.0] Assemble TV bracket extenders onto Assemble TV bracket extenders onto Assemble TV bracket extenders onto TV bracket and secure using eight...
Página 8
1.3 Select TV Screw Diameter 1.4 Select TV Screw Length Standard configurations are shown. For special applications, or if you If your TV has a flat back AND you want your TV closer to the Hand thread screws into the threaded inserts are uncertain about your wall, use the shorter screws.
Página 9
1.5 Attach TV Bracket Position your TV bracket configuration (A, B, C, D or E) over your TV hole pattern - making sure the bracket is centered over the TV hole pattern and level. Secure bracket using your short screw/washer (Flat Back) or long screw/washer/spacer (Round Back / Extra Space) selection. IMPORTANT: Ensure TV bracket is securely fastened before moving on to the next step.
Página 10
STEP 2A Attach Wall Plate to Wall Wood Stud Option CAUTION: Avoid potential personal injuries and property damage! ● Drywall covering the wall must not exceed 5/8 in. (16 mm) ● Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm) Locate your stud.
Página 11
Drill pilot holes using a 7/32 in. (5 mm) diameter drill bit. Remove wall plate template IMPORTANT: Be sure to drill into the center of the stud. IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm). Install wall plate assembly using two lag bolts and two washers...
Página 12
STEP 2B Attach Wall Plate to Wall Solid Concrete or Concrete Block Option CAUTION: Avoid potential personal injuries and property damage! Concrete Installation Kit CMK1 is not included (see page 5) Contact Customer Service ● Mount the wall plate assembly directly onto the concrete surface at 1-888-333-9952 to have the additional ●...
Página 13
Remove the wall plate template and insert three anchors (Fischer UX 10 x 60 - included in the Concrete Installation Kit CMK1*). CAUTION: Be sure the anchors are seated flush with the concrete surface. Install wall plate assembly using three lag bolts and three washers (use only the lag bolts and washers from the Concrete Installation Kit* CMK1).
Página 14
STEP 3 Hang TV onto Wall Plate HEAVY! You may need assistance with this step. Fold first section of the arm of wall plate assembly against the wall to provide stability. Hang the TV onto the arm of wall plate assembly by first hooking the top support, then resting the TV into place.
Página 15
Manage Cables Cables can be routed through the cable channel on the top of the arm of the wall plate assembly for a cleaner look. Cables ties can be used to secure the cables to the wall plate. Lock the TV to the wall plate assembly with locking screw CAUTION: Route cables around the arm post and through the open area of the...
Página 16
TV Adjustments TILT ADJUSTMENT LEVEL ADJUSTMENT Your TV should adjust easily when moved, then stay in place. To adjust the leveling of your TV, loosen the locking screw , level your TV, then tighten locking screw If your TV is too loose or too tight, adjust the tilt tension knob by hand. IMPORTANT: This locking screw must be installed to secure NOTE: Once your TV is in place, tighten the tilt tension knob to...
Página 17
REMOVING THE TV HEAVY! You may need assistance with this step. To remove your TV from the wall plate assembly , disconnect all cables and then reverse the procedures in STEP 3.
Página 18
Features Fully articulating arm with Adjustments allow fi ngertip control three pivot points, creates of TV or restriction of TV movement optimal viewing position(s) 40.0 30.0 20.0 10.0 15º 20.0 40.0 10.0 TV bracket can be confi gured to fi t TV hole patterns from 7.5 x 7.5 cm Cable channel Level...
¿Su televisor pesa más de 27.2 kg No — ¡Perfecto! 27.2 kg (60 lb), incluidos Sí — Este soporte NO es compatible. decora.sanus.com Visite o llame al 1-888-333-9952 los accesorios? (60 lb) (Reino Unido: 0800-056-2853) para encontrar un soporte compatible.
ESPAÑOL Piezas y accesorios suministrados ADVERTENCIA: Este producto contiene piezas pequeñas que, si fuesen tragadas, podrían producir asfixia. Antes de iniciar el ensamblaje, compruebe que todas las piezas estén incluidas y en buenas condiciones. Si faltan piezas o alguna está dañada, no devuelva el artículo al distribuidor;...
ESPAÑOL 1,3 Seleccione el diámetro de los 1,4 Seleccione el largo de los tornillos tornillos para el televisor para el televisor Enrosque manualmente los tornillos en los Si el dorso del televisor es plano, utilice los PRECAUCIÓN: tornillos cortos. encastres roscados del dorso del televisor a Verifique que el tornillo o la combinación fin de determinar qué...
ESPAÑOL Instale el módulo de la placa mural usando dos tornillos tirafondo y dos arandelas . Ajuste los tornillos tirafondo solamente hasta que queden firmes contra la placa mural. PRECAUCIÓN: El uso indebido podría reducir la capacidad de retención de los tornillos. NO ajuste en exceso los tornillos tirafondo. PASO 2B Fijar la placa mural - Hormigón sólido o bloques de cemento PRECAUCIÓN: Evite lesiones y daños materiales.
ESPAÑOL PASO 3 Colgar el televisor en la placa mural ¡ELEMENTO PESADO! Es posible que necesite ayuda en este paso. Pliegue la primera sección del brazo del módulo de la placa mural contra la pared para dar mayor estabilidad. Para colgar el televisor en el brazo del módulo de la placa mural , primero enganche el soporte superior y luego apoye el televisor en su lugar.
ESPAÑOL Ajustes del televisor AJUSTE DE LA INCLINACIÓN AJUSTE DEL NIVEL El televisor debe acomodarse fácilmente al moverlo, y luego Para ajustar la nivelación de su televisor, afloje el tornillo de quedar en su lugar. seguridad , nivele el televisor, y luego ajuste el tornillo de seguridad Si el televisor está...
ESPAÑOL Descripción El brazo completamente articulado crea un Los ajustes permiten movimiento de 3 puntos para alcanzar una el control manual 40.0 posición de visualización óptima. o la restricción del 30.0 movimiento del televisor. 20.0 10.0 15º 20.0 40.0 10.0 La placa de sujeción puede confi...
Página 28
Thank you for choosing Sanus Decora! Please take a moment to let us know how we did: Call us: 1-888-333-9952 Email us: info@sanus.com Leave a review: decora.sanus.com UK: 0800 056 2853 Find us on Facebook: SANUS Follow us on Twitter @sanussystems Milestone AV Technologies and its affi liated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete.