Sanus DECORA DMF115 Manual De Instrucciones página 12

STEP 2B Attach Wall Plate to Wall
CAUTION:
Avoid potential personal injuries and property damage!
●
Mount the wall plate assembly
●
Minimum solid concrete thickness: 8 in. (203 mm)
●
Minimum concrete block size: 8 x 8 x 16 in. ( 203 x 203 x 406 mm)
1. Position the wall plate template
2. Drill three pilot holes using a 3/8 in. (10 mm) diameter masonry drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm). Never drill into the mortar between blocks.
1
NOTE: TV shifts 2.99 in. (7.59 cm) to
the right or left when in the home
position. Consider this when selecting
the location of your wall mount.
12
18
directly onto the concrete surface
17
on the wall at your desired height. Level the wall plate template and mark the hole locations.
17
Solid Concrete or Concrete Block Option
Concrete Installation Kit CMK1 is not included
(see page 5) Contact Customer Service
at 1-888-333-9952 to have the additional
hardware shipped directly to you.
2
17
3 in. (75 mm)
3/8 in.
(10 mm)