Listo RDL 130-50b4 Instrucciones De Uso página 22

Unplug the appliance from the power point when reversing the direction that the
doors open.
To reverse the direction that the doors open, have someone else assist who will hold
the doors of the appliance during the operation and get the following tools:
1 Phillips screwdriver
1. Remove the top right hinge cover.
2. Using the 8 mm socket spanner or a suitable Phillips screwdriver, remove the 3
screws from the upper hinge (Figure A).
3. Release the freezer door by lifting it off the
middle hinge pin.
4. On the top of the freezer door, using a flat
screwdriver, swap the stud and the cap (Fig. B).
5. Underneath the freezer door, remove the right-
hand door stopper and fit the other stopper
provided (in the accessory bag) on the left-
hand side (Fig. B).
V.1.0
1 flat screwdriver
F A
igure
Cap
22
1 x 8 mm socket
Stop
F
igure
Stud
B