Techno Line WS1700 Operación Manual página 35

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 67
Daily alarm set-up
Press "MODE" to switch to "Alarm1" mode, "A1" and the alarm displayed
Press and hold the key "MODE" for 3 seconds ,the flashing alarm time are shown
The hour display of the alarm time is flashing. Use "UP "and "DOWN" to select the hour.
Press "MODE" to confirm.
Then follow the minutes. Use "UP " and "DOWN " to select the minutes,
Press "MODE" to confirm.
Then press "MODE" to switch to "Alarm2" mode, "A2" and the alarm displayed
Press and hold the key "MODE" for 3 seconds ,the flashing alarm time are shown
The hour display of the alarm time is flashing. Use "UP "and "DOWN" to select the hour.
Press "MODE" to confirm.
Then follow the minutes. Use "UP " and "DOWN " to select the minutes,
Press "MODE" to confirm.
Daily alarm on/off
Press "MODE" to switch from time display to "Alarm 1" or "Alarm 2" mode
When showing A1 or A2 alarm time, press "UP"or "DOWN" to activate the alarm with
alarm symbol showing.
Press "UP' or "DOWN" again to cancel the alarm
Information:
The clock automatically changes from set-up mode to time mode if no keys are pressed
for 20 seconds.
The alarm sounds for 2 minutes if no key is pressed to stop it.
Snooze function
To activate the snooze function, follow the steps below
Press the key "SNOOZE/LIGHT", while the alarm sounds, to activate the snooze function.
If the snooze function is
The alarm repeat after 5 minutes.
The snooze function can be stopped by pressing any other key than "SNOOZE/LIGHT"..
Temperature alert set-up
Press "MODE" to switch to "Temperature alert" mode
activated,
alarm symbol is flashing.

Publicidad

Tabla de contenido
loading

Tabla de contenido