Indirect Pythagoras Measurement ( 1 ); Indirect Pythagoras Measurement ( 2 ) - Ega Master EGATronik 65424 Manual De Instrucciones

1. Press to switch to indirect Pythagoras measurement
2. According to the flashing edge, point the laser at the first point of the target, press
measure the first hypotenuse.
3. Rotate to the direction perpendicular to the target with the set reference as center, press
to measure one right-angle side.
4. Rotate to the third point of the target with the same reference as center, press
measure the second hypotenuse.
5. The calculation result of the length between the first point and the third point is displayed at
the bottom of the screen.
1. Press to switch to indirect Pythagoras measurement
2. Point the laser to the first point of the target, press
3. Rotate to the second point of the target with the set reference as center, press
measure the second hypotenuse.
4. Rotate to the direction perpendicular to the target with the same reference as center, press
to the third right-angle side.
5. The calculation result of the length between the first point and the second point is displayed
and at the bottom of the screen.
14

INDIRECT PYTHAGORAS MEASUREMENT ( 1 )

INDIRECT PYTHAGORAS MEASUREMENT ( 2 )

.
.
to measure the first hypotenuse.
to
to
to