Genius G-BAT 300 Manual Del Usuario página 8

1. DESCRIPTION
1.1. TECHNICAL SPECIFICATIONS
1.2. DIMENSIONS
2. INSTALLATION
2.1. ELECTRIC PREPARATIONS (STANDARD SYSTEM )
2.2. PRELIMINARY CHECKS
2.3. INSTALLATION DIMENSIONS
2.4. INSTALLING THE OPERATOR
3. ELECTRICAL CONNECTIONS
4. START-UP
5. AUTOMATED SYSTEM TEST
6. MANUAL OPERATION
7. RESTORING NORMAL OPERATION MODE
8. MAINTENANCE
9. SPECIAL APPLICATIONS
10. REPAIRS
11. ACCESSORIES
CE DECLARATION OF CONFORMITY FOR MACHINES
Manufacturer: GENIUS S.p.A.
Address: Via Padre Elzi, 32 - 24050 - Grassobbio- Bergamo - ITALY
Declares that: Operator mod. G-BAT/G-BAT Lento/G-BAT 24 with 230 Vac power supply
• is built to be integrated into a machine or to be assembled with other machinery to create a machine under the provisions of Direc-
tive 98/37/EC;
• conforms to the essential safety requirements of the following EEC directives:
• 2006/95/EC Low Voltage directive.
• 2004/108/EC Electromagnetic Compatibility directive.
Furthermore, the manufacturer declares that the machinery must not be put into service until the machine into which it will be integrated
or of which it will become a component has been identified and its conformity to the conditions of Directive 89/392/EEC and subsequent
modifications assimilated in Italian National legislation under Presidential Decree No. 459 of 24 July 1996 has been declared.
Grassobbio, 30 May 2008
Read this installation manual to the full before you begin installing the product.
The symbol indicates notes that are important for the safety of persons and for the good condition of the automated system.
The symbol
INDEX
(DIRECTIVE 98/37/EC)
Notes on reading the instruction
draws your attention to the notes on the characteristics and operation of the product.
The Managing Director
D. Gianantoni
6
page.7
page.7
page.7
page.8
page.8
page.8
page.8
page.9
page.9
page.10
page.10
page.10
page.10
page.10
page.10
page.10
page.10