Symbols Used; In The Documentation; User Information; Safety Instructions - Bosch 1 687 010 193 Manual Original

1.

Symbols used

1.1

In the documentation

1.1.1 Warning notices -
Structure and meaning
Warning notices warn of dangers to the user or
people in the vicinity. Warning notices also indicate
the consequences of the hazard as well as preventive
action. Warning notices have the following structure:
KEY WORD – Nature and source of hazard!
Warning
symbol
Consequences of hazard in the event of
failure to observe action and information
given.
¶
Hazard prevention action and information.
The key word indicates the likelihood of occurrence
and the severity of the hazard in the event of non-
observance:
Key word Probability of
occurrence
DANGER Immediate impending
danger
WARNING Possible impending
danger
CAUTION Possible dangerous
situation
1.1.2 Symbols in this documentation
Symbol Designation Explanation
Attention Warns about possible property damage.
!
Information Practical hints and other
i
useful information.
1. Multi-step Instruction consisting of several steps.
2. operation
One-step Instruction consisting of one step.
e
operation
Intermediate An instruction produces a visible

result intermediate result.
Final result There is a visible final result on
"
completion of the instruction.
1.2

On the product

!
Observe all warning notices on products and ensure
they remain legible.
Robert Bosch GmbH
Symbols used | 1 687 010 193 / 1 687 016 193 | 21
Severity of danger if
instructions not observed
Death or severe injury
Death or severe injury
Minor injury
2.

User information

2.1 Important notes
Important information on copyright, liability and
warranty provisions, as well as on equipment users
and company obligations, can be found in the separate
manual "Important notes on and safety instructions for
Bosch Diesel Test Equipment". These instructions must
be carefully studied prior to start-up, connection and
operation of the 1 687 010 193 / 1 687 016 193 and
must always be heeded.
2.2

Safety instructions

All the pertinent safety instructions can be found
in the separate manual "Important notes on and
safety instructions for Bosch Diesel Test Equipment".
These instructions must be carefully studied
prior to start-up, connection and operation of the
1 687 010 193 / 1 687 016 193 and must always be
heeded.
2.3 Notes regarding the document
For your own safety and to prevent damage to the
test bench as the result of improper operation, read
the original operating manual carefully and follow all
instructions.
These instructions are only valid in conjunction with the
instructions supplied for the:
R
Injection pump test bench EPS 708 (1 689 989 067)
and / or injection pump test bench EPS 815
(1 689 979 672/1 689 989 348)
R
Continuous flow-rate measurement system
KMA 802/822 (1 689 979 674)
R
Tester set for common rail pumps CRS 845H
(1 689 989 069)
These instructions must be kept and distributed
together with the instructions listed above.
en en
|
1 689 989 337 2017-06-15