Jøtul FS 162 Advance Instrucciones Para Instalación página 20

ENGLISH
Contents
1.0 Regulatory information .......................... 20
2.0 Technical data ......................................... 20
3.0 Before installation ................................... 21
4.0 Installation ............................................... 21
5.0 Installation completed ...........................23
Figures ............................................................
Product:
Jøtul
Room heater fired by solid fuel
Standard :
Minimum distance to adjacent combustible materials:
Minimum distance to adjacent combustible materials:
Emission of CO in combustion products :
Flue gas temperature :
Nominal heat output :
Efficiency
:
Operation range :
Fuel type :
Operational type :
The appliance can be used in a shared flue.
Country Classification Certificate/ Approved by
standard
Norway Klasse II
SP Sveriges Provnings- och
Sweden SP
OGC
Forskningsinstitut AB
SP Swedish National
Testing and Research
EUR Intermittent EN
Institute
Follow user`s instructions. Use only recommended fuels.
Montage- und Bedienungsanleitung beachten.
Verwenden Sie nur empfohlenen Brennstoffen.
Respectez les consignes d'utilisation. Utilisez uniquement
les combustibles recommandés.
Serial no: Y-xxxx, Year: 200x
Manufacturer: 221546
Jøtul AS
POB 1441
N-1602 Fredrikstad
Norway
20
Serial no.
1.0 Regulatory information
Jøtul FS 162 - Advance is a freestanding product, which can be
positioned against infl ammable walls at the distances described
in fi g. 1A and fi g. 1B.
The installation of a fi replace must take place in accordance
with each country's laws and regulations. All local ordinances
must also be complied with when products are installed.
Installation instructions for the stove accompany the surround.
Installation and operating instructions for the fi replace insert
accompany the insert. For day-to-day use, maintenance,
service work, etc. see the General use and maintenance
instructions.
The installation manual for Jøtul FS 162 - Advance normative
44
in h. h .t. Installation requirement or information described in
fi g. 1 and in «2.0 Technical data»
The product has been tested and documented as a freestanding
stove in accordance with EN 13240.
The rating plate for the freestanding product comes with the
installation instructions for the surround. It should be positioned
in a suitably visible place.
2.0 Technical data
Two options are available for the product:
• Standard
• Standard with additional height
Material:
Finish, burn chamber:
Type of fuel:
Max. log length:
Smoke outlet:
Flue pipe dimension:
External air connection:
Weight, burn chamber, approx.:
Weight, surround, approx.:
Weight, additional height, approx.:
Height:
Height, additional height:
Diameter
Minimum distance to ceiling low model:
Minimum distance to ceiling lhigh model:
Product dimensions, distances:
The product is fitted with a vent (fi g. 19 A) which must be open
during normal heat production to ensure an adequate supply of
air. The vent may be closed after the fire has burned down and
the stove will continue to radiate heat for many hours.
Cast iron/Soap stone
Black
Wood
33 cm
Top, rear
Ø 150 mm
Alu. fl ex - Ø 100 mm
120 kg
314 kg
61 kg
1 580 mm
365 kg
603 mm
750 mm
510 mm
See Fig. 1