Meter Maintenance Battery; Replacing The Battery - Abbott FreeStyle Freedom Manual Del Propietário

Ocultar thumbs Ver también para FreeStyle Freedom:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Meter Maintenance
Battery
Your FreeStyle Freedom® Lite meter comes with one preinstalled,
#2032, 3 volt, lithium battery. The battery provides enough power for
the meter to perform about 1000 tests. If your battery runs low, the
battery symbol ( ) appears on every display screen until you change
the battery.
Important: When this symbol appears, you should replace the battery
immediately.
To avoid losing the time and date settings, replace the battery
within one minute of removing the old battery.
If you take more than one minute to replace the battery, you may
need to reset the time and date to get the correct 7-, 14- and 30-day
averages. If the time and date settings are lost, the time and date
displays flash 12:00 and 00-00 until they are reset.
Removing the battery does not affect the meter's memory log or
previously-stored user settings (such as date and time formats).
If the time and date settings are not reset, test results will be stored
in memory with a time of 12:00 and a date of 00-00.
Even if you lose your time and date settings – you can perform a
blood glucose test, and results will not be affected.

Replacing the Battery

1
Turn the meter over. Slide the battery door to
the right to open.
To remove the battery, pull the plastic tab up to
release the battery.
26

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido