Setting Up The Meter; Enter Setup Mode; Beeper; Time - Abbott FreeStyle Precision H Manual Del Usuario

Setting Up the Meter

Enter Setup Mode

Beeper

Press or
Press to save the beeper setting and move
to set time.

Time

3
Start with the meter off (no test
strip inserted).
Press and hold until
and indicate the beeper is turned off.
to change the beeper setting.
The hour flashes. Press
the hour and to move to set minutes.
The minutes flash. Press
save the minutes and to move to set date.
Commands
•
Press
•
Press
•
Press
•
Press
and appear. This indicates the beeper is turned on.
The beeper sounds when:
•
The test countdown starts
•
The test countdown ends
or until the correct hour appears. Press
or until the correct minutes appear. Press
to move between setup displays
to move forward
to go back
to turn display light On and Off
to save
to