General Safety Notes - ROBBE POWER PEAK Infinity 3 Manual De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

16. GENERAL SAFETY NOTES

The POWER PEAK Infinity 3 is suitable solely for charging and discharging recharge-
able NC / NiMH / Lead-acid, Lithium and Lithium-Polymer batteries. Do not attempt
to recharge dry cells - explosion hazard.
The charger is designed solely for use with a 12 V DC power supply; do not connect
it to any other voltage.
Protect the charger from dust, dirt and damp.
Do not subject the charger to excessive heat or cold, nor to direct sunlight.
Avoid shock and pressure loads, and do not subject the charger to severe vibration.
Never place the charger and the batteries connected to it on any form of flammable
surface.
Never operate the charger in the vicinity of inflammable materials or gases.
Do not leave the charger operating unsupervised. It is normal for the unit to become
quite hot when running.
Make sure that there is an unrestricted airflow to the charger's cooling slots.
If you will not be using the charger for a protracted period, disconnect it from the
power source and any batteries connected to it.
Never charge any battery a second time immediately after its initial charge.
Do not charge a battery which is already warm or hot to the touch. Allow packs to cool
down to ambient temperature before continuing.
Packs to be charged as a unit must consist of cells of the same make, the same type
and the same capacity.
Do not charge two batteries connected in parallel to one output; connect only one bat-
tery at a time.
Take great care to maintain correct battery polarity, and avoid short-circuits.
Read the battery manufacturer's instructions and adhere to them strictly.
Always check the settings on the POWER PEAK Infinity 3 very carefully. Incorrect
charger settings can destroy batteries.
Check the charger case and cables for damage at regular intervals.
Please take particular care when handling packs containing large numbers of cells.
Ensure that the cells are thoroughly insulated, otherwise there is a danger of electric
shock.
Car battery
Operating Instructions
POWER PEAK Infinity 3
Do not connect the output to the input.
Charger
Car body
29
No.
8429
Batterie

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

8429

Tabla de contenido