DENTSPLY AutoMatrix Snippers+ Manual De Usario página 2

AutoMatrix Snippers
+
®
& Catch-Tray
Snippers + &
AutoMatrix
®
Catch Tray
Illustrated Technique Guide
Illustrated Technique Guide
1 2
Attach Catch-Tray from the left Make sure that the Catch-Tray
side then turn 90° in the is properly connected to the
instrument axis. Snippers+.
5 6
Clip any part of the projecting end For loosening of Catch-Tray, open
of the AUTO-LOCK LOOP. Snippers+ as widely as possible.
Cover-Layout-3.indd 2
Caution, consult
instructions for use
Manufactured by:
DENTSPLY DT GmbH,
De-Trey-Str. 1
78467 Konstanz
GERMANY
© DENTSPLY DT 2014-08-12
www.dentsply.eu
www.dentsply.com
3 4
Important: Turn instrument and Gap leads to malfunction of the
check that there is no gap between Snippers+ and Catch-Tray cannot
Catch-Tray and Snippers+. prevent clipped loop pieces from
the oral cavity.
7
Pull off Catch-Tray with clipped
pieces from the Snippers+.
13.08.14 14:51