It is strictly forbidden to use the equipment
"COMPACT 22O" or make someone who has
not read, understood and fully assimilated this
manual.
It is strictly forbidden to use the equipment
"COMPACT 220" to staff not properly trained or
in not good conditions.
It is strictly forbidden to use welding equipment or
produce flame or incandescent handling products
in the area where the equipment is located.
The equipment "COMPACT 220" is constructed
for washing small pieces with solvent based paint.
It is strictly forbidden to use chlorinated solvents,
fluorinated
carbon-based
halogenated hydrocarbons.
In case of solvent contact with skin or eyes, wash
with water and contact a doctor.
The "SAGOLA COMPACT 220" should not be
used for cleaning or degreasing objects destined
to be in contact with food.
The equipment "COMPACT 220" is delivered
packaged. It must be transported and stored
according to the indications on the packaging.
All installation operations of the equipment
"COMPACT 220", and testing should be carried
out by appropriate and responsible personnel that
ensures safe working.
11.1. CONTROLS TO START UP
The compressed air pressure of the equipment
"COMPACT 220" must be at least 7 bar. The
maximum pressure must not exceed 10 bar. In the
event that the pressure is higher, it is necessary to
place the air filter regulator and regulate to max.
7 bar.
The compressed air must be filtered and dry.
8. SAFETY
substances
or
9. ECOLOGY
10. TRANSPORT AND DISCHARGE
11. INSTALATION
- 16 -
We suggest to get use with command devices and
their functions before starting work.
Locate the equipment "COMPACT 220" in a well
ventilated area and connect your gas extraction
outside to prevent the accumulation of gases
generated in the process of work.
It is strictly prohibited to place on equipment of
objects not suitable dimensions and weighing more
than 20 kg.
Periodically clean all equipment "COMPACT 220",
replace the absorption filter when it does not allow
a suitable filtering.
The site must have all the means provided for in
the legislation relating to health and the prevention
of labor risks for operators.
Should be respected the laws concerning the use
of products used in cleaning and washing parts
and the equipment inshelf "COMPACT 220".
Due to the low weight of the equipment
"COMPACT 220" can be moved by two people
without using other means.
11.2. PROCESS START UP
Before installing the equipment "COMPACT 220"
check that has not been damaged during transport.
Once verified place the equipment "COMPACT
220" in the requested area that must be flat,
smooth and perfectly level. We suggest to use a
deposit below to prevent liquid spills.
To feed the equipment connect the compressed air
through the quick coupling.