Descargar Imprimir esta página

ROBBE POWER PEAK MAXAMP Manual Del Usuario página 15

Publicidad

Idiomas disponibles

Idiomas disponibles

Appendix
Short Display
The „SHORT DISPLAY" mode can be selected instead of the „LONG DISPLAY" mode,
which has been described up to this point in these instructions.
Press the UP and DN buttons simultaneously to toggle between these two display modes.
In Short Display mode the screen initially displays the value units, then switches to the cor-
responding numeric values. The units can be displayed again by pressing the UP button
briefly.
0.V. 0.A. C1mAh C
11.72V 5.00A 2120 C
AVE. PEAK CH.T
10.7V11.8V1534S C
ENERGY
TEMP. C
0.22.60Wh 31.0°C C
SCA SDA SDCV
0.5.0A08.0A05.6V C
SCCV SCCT SCDV C
53.00V38°C10mVc C
I.V. TX&RX.V.
12.33V 10.90V
We reserve the right to alter technical specifications.
Operating instructions
POWER PEAK MAXAMP
Units
Display battery voltage, charge / discharge current, charged-
in / discharged capacity
Numeric values
C
Display average voltage, maximum voltage, charge / dischar-
ge time
Display charged-in / discharged energy and battery tempera-
ture
C
Set charge current, discharge current and final discharge vol-
tage
Set final charge voltage, termination temperature and Delta
Peak sensitivity
C
Display input voltage and battery voltage at TX/RX output
C
16
Order No.
8121

Publicidad

loading

Este manual también es adecuado para:

8121