Victory RF
Scope of delivery
Binoculars with laser range finder
Eyepiece cap
2 protective lens covers
Carry case
Carrying strap
3V type CR 2 lithium battery
Optics cleaning cloth
Instructions, guarantee card
Preparation
Inserting/Removing the battery
The laser range finder is powered by a type CR 2 lithium battery.
To insert and replace the battery, unscrew the battery cover (Fig. 2/8) – using
a coin or similar – by turning anticlockwise. Insert the battery with the
positive end forward (according to the symbol in the battery compartment).
Then screw the battery cover back on by turning clockwise.
At 20 °C, a new battery will last for over 10,000 measurements.
Depending on the conditions of use, however,
low temperatures or frequent use of the scan
mode for example may result in the battery
life being considerably shorter.
A low battery is indicated by the display
flashing.
If the equipment will be unused for a long
period, remove the battery in order to prevent
damage by leakage from the battery. Use only
high quality brand batteries.
19