PEERLESS Paramount PSP2 Instalación Y Montaje página 6

3-2
For Attachment to Drywall surface
Use mounting plate (A) as a template to
mark the two mounting holes. NOTE: In wall
mounting applications position mounting holes
in a vertical pattern. Drill two 5/16" (8 mm) dia.
holes through drywall. Insert anchors (O) in
holes fl ush with drywall as shown in fi gure 3.4.
Place mounting plate over anchors and secure
with two #12 x 1-3/4" self tapping screws (N).
Installing Arms to Mounting Plate
4
Insert arm (C) or extension arm (D) onto mounting plate attached to
surface as shown in fi gure 4.1 or 4.2. Extension arm can be used with
arm as shown in fi gure 4.3. Tighten set screws with allen wrench (P).
NOTE: Extension arm is not recommended with wall mounted
applications.
Insert mounting plate (A or B) attached on speaker into arm (C). Tighten
set screw with allen wrench (P) as shown in fi gure 4.4 or 4.5.
fi g. 4.1
A
SET SCREW
C
fi g. 4.4
A or B
C
Visit the Peerless Web Site at www.peerlessmounts.com
fi g. 3.4
fi g. 4.2
C
SET SCREW
6 of 18
fi g. 3.5
DRYWALL
O
A O
N
A
SET SCREW
fi g. 4.5
A or B
C
SET SCREW
ISSUED:10-23-07 SHEET #: 087-9016-4 02-12-18
For customer care call 1-800-729-0307 or 708-865-8870.
All other brand and product names are trademarks or registered trademarks of their respective owners.
DRYWALL
A
O
fi g. 3.6
fi g. 4.3
A
D
SET SCREW
C
© 2007, Peerless Industries, Inc. All rights reserved.
N