Lifting; Transport; Regulations For Safe Use And The Prevention Of Accidents - Checchi & Magli F 300 L Manual De Uso Y Manutención

6.0 - LIFTING

6.1 - Check that the lifting gear, hooks, ropes, chains, etc., are of sufficient capacity
for the task (see weight indicated on machine data plate and in the weights and
measures table).
6.2 - Fix hooks, ropes, chains, etc., in the three positions shown in fig. 3.
6.3 - Operate the lifting system slowly and before lifting definitively, make certain that
no deviation occurs and that there are no members of the public in the work area.
6.4 - Keep at a safe distance and do not for any reason enter areas subject to the
risk of accidental falling of the machine.

7.0 - TRANSPORT

Check that the vehicle to be used is suitable in terms of capacity, size and any other
respect stipulated in the highway code.
Position the machine in such a way that it does not protrude beyond the profile of the
vehicle, and fix it adequately with ropes or other means so as to prevent uncontrolled
movements.
8.0 - REGULATIONS FOR SAFE USE AND THE
PREVENTION OF ACCIDENTS
8.1 - Read all the instructions before using the machine, especially those which
relate to safeguarding against physical injury. The Manufacturer accepts no
responsibility for any damage arising from improper use of the machine or failure to
observe these instructions.
It is the duty of the user to inform employees and other personnel of the directions
set out in this document (this is a legal requirement).
8.2 - Pay attention to the danger symbols shown in this manual and on the
machine.
8.3 - Adjustment, maintenance or work of any kind on the machine must be carried
out only with the engine OFF, the machine resting on the ground, and the tractor
chocked.
30
FIG. 3
F 300 L
A
FIG. 4