Connect The Cable To The Outdoor Unit - Friedrich J Serie Manual De Instalación

Connect the cable to the Outdoor unit.

1. Remove the control cover from the unit by loos-
ening the screw.
Connect the wires to the terminals on the control
board individually as the following.
2. Secure the cable onto the control board with the
holder (clamper).
3. Re-attach the cover control to the original posi-
tion using the screws.
24kBtu/h class
36 kBtu/h class
48 kBtu/h class
Indoor Unit Terminal Block Indoor Unit Terminal Block
A Unit B Unit
1(L1) 2(L2) 3 1(L1) 2(L2)
L(L1) N(L2) S L(L1) N(L2) S
A Room B Room
BD Unit (A)
Connecting the Cable between Indoor Unit, Distributor Unit and Outdoor Unit
Indoor Unit Terminal Block Indoor Unit Terminal Block
C Unit D Unit
3 1(L1) 2(L2) 3 1(L1) 2(L2)
L(L1) N(L2) S L(L1) N(L2) S
C Room D Room
L(L1) N(L2) S
L1 L2
Conduit
hole
Indoor Unit Terminal Block Indoor Unit Terminal Block
E Unit F Unit
3 1(L1) 2(L2) 3 1(L1) 2(L2)
L(L1) N(L2) S L(L1) N(L2) S
A Room B Room
BD Unit (B)
1(L1) 2(L2) 3(A) 1(L1) 2(L2)
BD Unit (A) BD Unit (B)
Power Power Power
supply cable supply cable supply cable
Connecting cable Connecting cable Connecting cable
(to the indoor unit) (to the indoor unit) (to the indoor unit)
Indoor Unit Terminal Block Indoor Unit Terminal Block
G Unit H Unit
3 1(L1) 2(L2) 3 1(L1) 2(L2) 3
L(L1) N(L2) S L(L1) N(L2) S
C Room D Room
L(L1) N(L2) S
3(B)
Installation Manual 29