Description Of Symbols; Environmental Protection - Silverline 129901 Manual Del Usuario

Taladro percutor 1050w
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22
GB

Description of Symbols

The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
DO NOT use on scaffoldings or ladders!
Caution!
Class II construction (double insulated for additional protection)
Conforms to relevant legislation and safety standards.

Environmental Protection

Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your local authority or retailer for recycling advice
Technical Abbreviations Key
V
Volts
~
Alternating current
A
Ampere
n
No load speed
o
Hz
Hertz
W, kW
Watt, kilowatt
/min or min
(revolutions or reciprocation) per minute
-1
4
Original Instructions
Specification
Voltage: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230V~ 50Hz
Power: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1050W
No load speed:. . . . . . . . . . . . . . . . 0-1000min-1 / 0-3000min
Impact rate:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-40,000min
Number of gears: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Chuck capacity:. . . . . . . . . . . . . . . . . . . . . . .2-13mm (keyless)
Chuck spindle thread: . . . . . . . . . . . . . . . . . . . . . . . ½"-20 UNF
Power cord length:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.8 m
Ingress protection:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IP20
Protection class: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.45kg
Max drilling capacities:
Masonry: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ø 20mm
Wood: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ø 30mm
Steel: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ø 13mm
As part of our ongoing product development, specifications of
Silverline products may alter without notice.
Sound and vibration information:
Sound Pressure L
: . . . . . . . . . . . . . . . . . . . . . . . . . . .94dB(A)
PA
Sound Power L
: . . . . . . . . . . . . . . . . . . . . . . . . . . . .105dB(A)
WA
Uncertainty K: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3dB
Weighted vibration a
(concrete): . . . . . . . . . . . . . . . . 13.52m/s
h
a
(metal): . . . . . . . . . . . . . . . . . 2.55m/s
h
Uncertainty K: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5m/s
The sound intensity level for the operator may exceed 85dB(A) and
sound protection measures are necessary.
WARNING: Always wear ear protection where the sound level exceeds
85dB(A) and limit the time of exposure if necessary. If sound levels are
uncomfortable, even with ear protection, stop using the tool immediately
and check the ear protection is correctly fitted and provides the correct level
of sound attenuation for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of
touch, numbness, tingling and reduced ability to grip. Long term exposure
can lead to a chronic condition. If necessary, limit the length of time
exposed to vibration and use anti-vibration gloves. Do not operate the tool
with hands below a normal comfortable temperature, as vibration will have
a greater effect. Use the figures provided in the specification relating to
vibration to calculate the duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according
to EN60745 or similar international standards. The figures represent
normal use for the tool in normal working conditions. A poorly maintained,
incorrectly assembled, or misused tool, may produce increased levels of
noise and vibration. www.osha.europa.eu provides information on sound
and vibration levels in the workplace that may be useful to domestic users
who use tools for long periods of time.
-1
-1
2
2
2

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido