Adjusting The Plastic Mulch Pressing Skid - Checchi & Magli WOLF Serie Manual De Uso Y Mantenimiento

Adjusting the plastic mulch pressing skid

B
UN41 0463BM
To adjust the skid pressure on the plastic mulch, pro-
ceed as outlined below.
1) Turn the nut (H) to change the skid pressure on the
plastic mulch.
To lower the skid, proceed as outlined below.
1) Turn the nut (H) to slacken the spring tension.
2) Unscrew the screws (B).
English language
ADJUSTMENT INFORMATION
G
E
3) Remove the skid.
4) Unscrew the nuts (C).
5) Remove the screws (D).
6) Lower the part (E) until the fastening holes are
aligned with the holes in the support.
7) Insert the screws (D) and the washers (G).
8) Tighten the nuts (C).
9) Fit the skid (see "Installing the plastic mulch pressing
skids").
20
H
D
F
C
G
Use and maintenance
5