Ama Rut Expert Manual De Instrucciones página 18

18
O
THER OPTIONS OF THE SOFTWARE
To have all options selectable, The Reader needs to be turned on, connected to the software, and the
test results from the Reader memory should be transferred to the software.
When clicking on Menu the following options are available:
 Delete results list: By choosing this option, all entries in the current list delete.
 Save data to file: By choosing this option, a window will open which allows picking a place to save
the reading results as a *.tsv file (tabular separated values). Such a file can be directly opened with
Excel, all information will be separated into different columns.
 Load data from file: By choosing this option, a previously saved results list can be reloaded. The list
has to be a *.tsv file.
 Format AMA RUT Reader database: By choosing this option, the Reader's database/memory will be
formatted. All data will be lost.
When clicking on Settings the following options are available:
 Set image position: When doing a quality check, this option determines where to place the picture
of the 2D volume diagram in conjunction with the results list. Presented will be the volume diagram
from the actual reading.
Possible image positions are the following: on the left side of the window, on the right side of the
window, full width of the window, do not display the image.
 Data management: This option allows choosing how the software will proceed with new data either
just read or downloaded, if there is already data in the list.