Maintenance Table - Movement Edge Puxada Baixa Manual De Montaje

ATTENTION!
ATTENTION
On the tower of each
piece of EDGE line
equipment, you will find
information relating to
SAFETY AND MAINTENANCE OF
the SAFETY AND
STEEL CABLES
MAINTENANCE OF THE
STEEL CABLES.
IMPORTANT
The cables are items that can become
Check the items cited
worn. It is your responsibility to avoid
the unexpected rupture of the cables.
DAILY for user safety.
The inspection of cables must be
performed daily.
*The location of the stickers may vary
according to the model of equipment.
Inspect all of the cables, the nylon
coating in all of the cables, and in
the area near the fixation in each
cable end.
REPLACE ANY DAMAGED OR
WORN CABLES IMMEDIATELY
Do not allow the equipment to be
used until the damaged or worn
cables have been replaced. By
using or allowing a machine to be
used with a suspected faulty cable
may result in severe injuries.
See guide for more information.
TABLE OF
MAINTENANCE
Check the functioning
and integrity of the
components. Check the
equipment in accordance
with the table.Replace all
of the components that are
damaged broken or worn
out immediately.
CABLES
Check the tension, finishing
and covering.
Check if the attachment nut
on the weights are tight.
UPHOLSTERY / SEAT
Clean and dry
For hygiene
STRUCTURE
Clean and dry,
polish and wax
WEIGHT GUIDE
Lubricate and clean
SEAT
Clean
ADJUST LOCK PIN
LOCK PIN FOR FEET
WARNING SIGN
HANDLES AND BEARINGS
For more information read the instruction
manual that comes with the product
8
INSTRUCTIONS

MAINTENANCE TABLE

On the tower of each
piece of EDGE line
equipment, you will find
a MAINTENANCE TABLE
The table suggests
checking various items of
the equipment, as well as
the frequency of checks.
*The location of the stickers may vary
according to the model of equipment.